AGGRO

               

Description:

AGGRO Sealer Stripper is a specially blended, powerful formation for the removal of a wide range of floor coatings, adhesives and graffiti. AGGRO does not flash off quickly like ketones and chlorinated solvents, allowing ample time to remove the dissolved coatings.

 

Advantages:

Maximum solvency and stripping power.

Water rinseable.

Slow to evaporate allowing plenty of time to remove the coating.

Not harmful to stone, masonry or tile surfaces

 

Characteristics:

Colour:                          Amber Brown

Weight:                         0.94

DG Class:                       3

U.N Number:               1993

Coverage:                     3 – 6 sq m per lt (depending on porosity)

 

Recommendations:

SILACRYL

PAVACRYL

HI-LACRYL

MOST: Acrylics, Graffiti, Urethanes, Epoxies, Adhesives

 

Disclaimer – User Guide

 

Solutions - Sealers for Stone & Tile believes the information contained in this document is accurate as general advice only. As general advice only it has been prepared without taking into account the objectives, problems or needs of the reader. Solutions – Sealers for Stone & Tile has presented this information as a guide only and accepts no liability for any loss or damage caused by any error in, or omission from, this document. Solutions – Sealers for Stone & Tile has no control over the use or misuse of this product, therefore no warranty expressed or implied shall be given. Solutions – Sealers obligations shall be limited to only replacing product PROVEN defective. The user MUST educate themselves on the performance value, application rates, substrate type and environment before product is applied, a TEST area is always highly recommended.