PLUS
Description:
PLUS is a high solids state of the art solvent based penetrating sealer, specifically designed for porous surfaces. It contains a carefully selected blend of solvents and resins which are renowned for durability. These resins are deposited into the capillaries of porous surfaces leaving a barrier against water and oil borne contaminants, with minimal change to the natural appearance of the surface.
Advantages:
Suitable for internal and external use.
Premium long life solvent based product.
Invisible finish which maintains a natural look.
Allows grout or tiles to breathe which means sealing is possible without lengthy delays.
Protects against water-borne and oil based stains.
Make cleaning of tiles easier.
Higher solids make it suitable for porous surfaces.
Characteristics:
Colour: Clear
Weight 0.88
Solvent Hydrocarbon
DG Class 3
U.N Number 1263
Coverage 6 – 8 sq m per lt (depending on porosity)
Recommendations:
Terra Cotta
Sandstone
Porous Granite
Porous Limestone
Clay Pavers
Concrete Pavers
Disclaimer – User Guide
Solutions - Sealers for Stone & Tile believes the information contained in this document is accurate as general advice only. As general advice only it has been prepared without taking into account the objectives, problems or needs of the reader. Solutions – Sealers for Stone & Tile has presented this information as a guide only and accepts no liability for any loss or damage caused by any error in, or omission from, this document. Solutions – Sealers for Stone & Tile has no control over the use or misuse of this product, therefore no warranty expressed or implied shall be given. Solutions – Sealers obligations shall be limited to only replacing product PROVEN defective. The user MUST educate themselves on the performance value, application rates, substrate type and environment before product is applied, a TEST area is always highly recommended.