EASI-SEAL
Description:
EASI-SEAL Penetrating Sealer is a non flammable, water base solution which provides an invisible protective barrier for porous tiles and grout. Because EASI-SEAL breathes, it can be applied 24 hours after laying of tiles or grout making it an excellent grout sealer or pre-grouting sealer on porous tiles.
Advantages:
Suitable for internal and external use.
Economical one coat application.
Non flammable, odorless solution.
Invisible finish which maintains a natural look.
Allows grout or tiles to breathe which means sealing is possible without lengthy delays.
Provides protection against water borne contaminants.
Resist cement and grout stains, making it an excellent pre-grout sealer.
Makes surfaces easier to clean and maintain.
Characteristics:
Colour: Clear
Weight 1
Solvent Water
DG Class 8
U.N Number 1263
Coverage 8 - 10 sq m per lt (depending on porosity)
Recommendations:
Grout Joints
Terra Cotta
Sandstone
Concrete
Clay + Concrete pavers
Disclaimer – User Guide
Solutions - Sealers for Stone & Tile believes the information contained in this document is accurate as general advice only. As general advice only it has been prepared without taking into account the objectives, problems or needs of the reader. Solutions – Sealers for Stone & Tile has presented this information as a guide only and accepts no liability for any loss or damage caused by any error in, or omission from, this document. Solutions – Sealers for Stone & Tile has no control over the use or misuse of this product, therefore no warranty expressed or implied shall be given. Solutions – Sealers obligations shall be limited to only replacing product PROVEN defective. The user MUST educate themselves on the performance value, application rates, substrate type and environment before product is applied, a TEST area is always highly recommended.
