PROTEX BIO-SAFE

Description:

PROTEX BIO-SAFE™ Stone Sealer is a specialized penetrating sealer for treating low absorptive surfaces such as polished porcelain tile. The small molecular structure of this Bio-Safe™ Technology sealer means that it penetrates into the microscopic pores of the tile and repels water and oil borne stains.

Advantages:

Suitable for internal and external use.

GECA Approved. http://www.geca.org.au/product-solutionsSealers.htm

Invisible, impregnating material.

Creates an excellent barrier against stains

Allows tile to breathe.

Makes routine cleaning easier.

Very fine molecules, leaving little or no residue on the surface after sealing.

Non-ozone depleting.

Natural fragrance while sealing.

Characteristics:

Colour: Clear

Weight: 0.86

Solvent: Hydrocarbon

DG Class: 3

U.N Number: 1263

Coverage 20 - 50 sq m per lt (depending on porosity)

Recommendations:

Polished Marble

Polished Granite

Polished Limestone

Polished Porcelain Stoneware

Natural Porcelain Stone

Disclaimer – User Guide

Solutions - Sealers for Stone & Tile believes the information contained in this document is accurate as general advice only. As general advice only it has been prepared without taking into account the objectives, problems or needs of the reader. Solutions – Sealers for Stone & Tile has presented this information as a guide only and accepts no liability for any loss or damage caused by any error in, or omission from, this document. Solutions – Sealers for Stone & Tile has no control over the use or misuse of this product, therefore no warranty expressed or implied shall be given. Solutions – Sealers obligations shall be limited to only replacing product PROVEN defective. The user MUST educate themselves on the performance value, application rates, substrate type and environment before product is applied, a TEST area is always highly recommended.

SOLUTIONS – Sealers For Stone & Tile

SOLUTIONS – Sealers for Stone & Tile are proud Australian manufacturers that produce a variety of quality sealing products to protect and enchance masonary surfaces including natural stone, concrete pavers, procelain tiles and grout. With years of research and product development, since our conception in the early 90’s we have produced a strong product base that competes on the world market. Our products are proven to reduce the damaging effects of common staining, efflorescence (salt attack), graffiti and water ingress.
SOLUTIONS – Sealers continue to develop innovative ways to meet our customer needs, be it performance based or environmental. We have a variety of sealers to combat the complexity of natural stone on the market, as well as Green approved (Good Environmental Choices Australia) products for the environmentally aware. VISIT: http://www.geca.org.au/product-solutionssealers.htm

1300 4 STONE