PLUS BIO-SAFE
Description:
PLUS BIO-SAFE™ is a high solids state of the art penetrating sealer, specifically designed for porous surfaces. Bio-Safe™ technology allows the sealer to deeply penetrate the surface without the associated health hazards that are in petrol-chemical solvents. These highly durable resins are deposited into the capillaries of the porous surfaces, leaving a barrier against water and oil borne contaminants, with minimal change to the natural appearance of the surface.
Advantages:
Suitable for internal and external use.
GECA approved. http://www.geca.org.au/product-solutionsSealers.htm
Invisible finish which maintains natural look.
Allows grout or tiles to breathe
Protects against water borne and oil based stains
Higher solids makes it suitable for porous surfaces
Non-ozone depleting.
Natural fragrance while sealing.
Makes cleaning of tiles easier.
Characteristics:
Colour: Clear
Weight: 0.88
Solvent: Hydrocarbon
DG Class: 3
U.N Number: 1263
Coverage: 6 – 8 sq m per lt (depending on porosity)
Recommendations:
Terra Cotta
Sandstone
Porous Granite
Porous Limestone
Clay Pavers
Concrete Pavers
Disclaimer – User Guide
Solutions - Sealers for Stone & Tile believes the information contained in this document is accurate as general advice only. As general advice only it has been prepared without taking into account the objectives, problems or needs of the reader. Solutions – Sealers for Stone & Tile has presented this information as a guide only and accepts no liability for any loss or damage caused by any error in, or omission from, this document. Solutions – Sealers for Stone & Tile has no control over the use or misuse of this product, therefore no warranty expressed or implied shall be given. Solutions – Sealers obligations shall be limited to only replacing product PROVEN defective. The user MUST educate themselves on the performance value, application rates, substrate type and environment before product is applied, a TEST area is always highly recommended.
