PROTEX

 

 

 

Description:

PROTEX is a specialized penetrating sealer for treating low absorptive surfaces such as polished porcelain tiles. The small molecular structure of this sealer means that it penetrates into the microscopic pores of the tile and repels water and oil borne stains

 

Advantages:

Suitable for internal and external use

Invisible, impregnating material

Creates an excellent barrier against stains

Allows tile to breathe

Makes routine cleaning easier

Very fine molecules leaving little or no residue on the surface after sealing.

 

Characteristics:

Colour:                          Clear

Weight                          0.86

Solvent                          Hydrocarbon

DG Class                        3

U.N Number                 1263

Coverage                      20 - 50 sq m per lt (depending on porosity)

 

Recommendations:

Polished Marble

Polished Granite

Polished Limestone/Travertine

Polished Porcelain Stoneware

Natural Porcelain Stone

 

 

Disclaimer – User Guide

 

Solutions - Sealers for Stone & Tile believes the information contained in this document is accurate as general advice only. As general advice only it has been prepared without taking into account the objectives, problems or needs of the reader. Solutions – Sealers for Stone & Tile has presented this information as a guide only and accepts no liability for any loss or damage caused by any error in, or omission from, this document. Solutions – Sealers for Stone & Tile has no control over the use or misuse of this product, therefore no warranty expressed or implied shall be given. Solutions – Sealers obligations shall be limited to only replacing product PROVEN defective. The user MUST educate themselves on the performance value, application rates, substrate type and environment before product is applied, a TEST area is always highly recommended.